ZyXEL Communications Omni 56K II - Manual (Page 50)

Omni 56K II and Omni 56K Plus II User’s Guide
5-4 Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
V1 * Displays the result code in verbose form.
Xn n=0-7
5 *
Result code options, see Table 4-1. S23.3-5
n=0-2 Resets the modem and set power-on profile. S15.5-7
Zn Resets the modem and load user profile n (0-1).
Zn
Z2 Resets the modem and load factory settings.
+++ This is the escape sequence code. When entered,
the modem returns to online command mode.
5.1.2 Extended AT& Command Sets
Table 5-3 Extended AT& Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
Data rate, terminal-to-modem. (DTE/DCE) S28.6
&B0 The DTE rate follows the connection rate. (See also
S44.6)
&Bn
&B1 * The DTE/DCE rates are fixed at the DTE setting
(See also S18, S20, and S44.6)
Carrier Detect (CD) options S21.4
&C0 CD always ON (See also S42.7)
&Cn
&C1 * CD tracks the presence of carrier (See also S38.3,
S42.7)
Data Terminal Ready (DTR) options. (See also S25) S21.6-7
&D0 Ignore DTR signal, assume DTR is always ON.
&D1 108.1, DTR OFF-ON transition causes dialing of the
default number. (See also 'AT*Dn' and S48.4)
&D2 * 108.2, Data Terminal Ready, DTR OFF causes the
modem to hang up.
&Dn
&D3 Same as &D2 but DTR OFF causes the modem to
hang up and reset from profile 0.
&F Load factory settings to RAM as active configuration.