ZyXEL Communications Omni 56K II User Manual
Page 67
Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets
5-21
COMMAND DESCRIPTION
VALUE
+FCR=n
Capability to Receive
n=0: Do not receive message
data or poll a remote device.
n=1: Receives message data or
polls a remote device.
+FCQ=
Copy Quality disable/enable
rq= 0:Receive copy quality
check is disabled.
rq=1:Receive copy quality
check is enabled.
tq= 0:Transmit copy quality
check is disabled.
tq=1:Transmit copy quality
check is enabled.
+FRQ=pql,cbl
Receive Quality Thresholds
pgl= 0-64h:Specifies the
percentage of good lines
cbl= 0-ffh:Specifies the
maximum tolerable number of
consecutive bad lines.
+FAA=n
Adaptive Answer Mode
n=0:Answers as set by
+FCLASS
n=1:Answers and automatically
determines the call type.
+FCT=n
Phase C Timeout
n=0-ffh,1 sec units
+FMS=n
Minimum Phase C Speed
n=0:2400 bps
n=1:4800 bps
n=2:7200 bps
n=3:9600 bps
n=4:12000 bps
n=5:14400 bps
+FBS? Buffer
Size
512,256