ZyXEL Communications Omni 56K II - Manual (Page 55)

Omni 56K II and Omni 56K Plus II User’s Guide
Command Sets 5-9
5.1.3 Extended AT* Command Sets
Table 5-4 Extended AT* Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
Character length, including start, stop and parity
bit. S15.3-4
*C0 * 10-bit character length
*C1 11-bit character length
*C2 9-bit character length
*Cn
*C3 8-bit character length
n=0-3 Set the default dial pointer at telephone directory
location 'n.' S29 *Dn
*D0 * (See also S35.4 and S38.0)
Modem error control negotiation. S21.0
*E0 * If error control negotiation fails, keep the non-error
control connection.
*En
*E1 If error control negotiation fails, disconnect the call
(hang-up).
*G0 Disables the security function. (Default)
*G1 Enables type 1 security, with password check.
*G2 Enables type 1 security, with password check and
call back.
*G3 Enables type 2 security, with password check.
*G4 Enables type 2 security, with password check and
call back.
*G5 Enables type 2 security, with password check and
call back; remote site enters the callback number.
*Gn
*G9 Resets the supervisor password to "ZyXEL".