ZyXEL Communications Omni 56K II - Manual (Page 48)

Omni 56K II and Omni 56K Plus II User’s Guide
5-2 Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
Dials (numbers and options) that follow (see also
S38.0, S35.4). The options of s are listed as
follows:
0-9, A,
B,C,D #, * Digits for dialing
P Pulse dialing S23.1
T Tone dialing S23.1
, Pause for a time specified in S8. Remaining digits
will be dialed as in-band DTMF.
; Return to command state after dialing.
! Hook flash S56
@ Waits for a 5 second silence before proceeding,
otherwise returns NO ANSWER.
R Reverse handshake. (go online in Answer mode) S17.5
Ds
W Wait for the second dial tone. Remaining digits will
be dialed as in-band DTMF.
DL Dials the last-dialed number.
DSn n=0-3 Dial the number stored in non-volatile RAM at
location 'n.' S44.3
Echoes the keyboard commands. S23.0
E0 Echo off
En
E1 * Echo on
On/off hook control.
H0 * Hang up (on-hook) the modem or ISDN, same as
'ATH.
Hn
H1 Sets the modem to off hook.
Displays the inquired information.
I0 Displays the numerical product code, same as
'ATI.'
In
I1 Displays the product information and ROM
checksum.