ZyXEL Communications NBG334W - Manual (Page 67)

Chapter 4 AP Mode
NBG334W User’s Guide
67
4.4 Configuring Your Settings
4.4.1 LAN Settings
Use this section to configure your LAN settings while in AP Mode.
Click Network > LAN to see the screen below.
"
If you change the IP address of the NBG334W in the screen below, you will
need to log into the NBG334W again using the new IP address.
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG334W to block
access to devices or block the devices from accessing the
NBG334W.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
LAN IP Use this screen to configure LAN IP address and subnet mask or to
get the LAN IP address from a DHCP server.
Maintenance
System General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG334W’s time and date.
Logs View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your NBG334W’s log settings.
Tools Firmware Use this screen to upload firmware to your NBG334W.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your NBG334W.
Restart This screen allows you to reboot the NBG334W without turning the
power off.
Config Mode General This screen allows you to display or hide the advanced screens or
features.
Language This screen allows you to select the language you prefer.
Table 23 Screens Summary
LINK TAB FUNCTION