ZyXEL Communications NBG334W - Manual (Page 190)

Chapter 19 System
NBG334W User’s Guide
190
19.3 Time Setting Screen
To change your NBG334W’s time and date, click Maintenance > System > Time Setting.
The screen appears as shown. Use this screen to configure the NBG334W’s time based on
your local time zone.
Figure 113 Maintenance > System > Time Setting
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Password Setup Change your NBG334W’s password (recommended) using the fields as shown.
Old Password Type the default password or the existing password you use to access the
system in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the NBG334W.
Reset Click Reset to begin configuring this screen afresh.
Table 74 Maintenance > System > General
LABEL DESCRIPTION