ZyXEL Communications NBG334W - Manual (Page 171)

Chapter 17 Remote Management
NBG334W User’s Guide
171
17.3 Telnet
You can configure your NBG334W for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the NBG334W.
Figure 93 Telnet Configuration on a TCP/IP Network
17.4 Telnet Screen
To change your NBG334W’s Telnet settings, click Management > Remote MGMT > Telnet.
The following screen displays.
Figure 94 Management > Remote MGMT > Telnet
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
NBG334W using this service.
Select All to allow any computer to access the NBG334W using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG334W using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
LABEL DESCRIPTION