ZyXEL Communications NBG334W - Manual (Page 216)

Chapter 23 Sys Op Mode
NBG334W User’s Guide
216
Figure 127 IP Address in AP Mode
23.2 Selecting System Operation Mode
Use this screen to select how you connect to the Internet.
Figure 128 Maintenance > Sys OP Mode > General
If you select Router Mode, the following pop-up message window appears.
Figure 129 Maintenance > Sys Op Mode > General: Router
• In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet
ports have different IP addresses.
• The DHCP server on your device is enabled and allocates IP addresses to other devices on
your local network.
• The LAN IP address of the device on the local network is set to 192.168.1.1.
• You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
If you select Access Point the following pop-up message window appears.
1 IP
LAN
Internet