Ap mode, 1 ap mode overview, 2 setting your nbg334w to ap mode – ZyXEL Communications NBG334W User Manual

Page 63: Chapter 4 ap mode, Figure 28 wireless internet access in ap mode, Ap mode (63)

NBG334W User’s Guide

H A P T E R

AP Mode

This chapter discusses how to configure settings while your NBG334W is set to AP Mode.
Many screens that are available in Router Mode are not available in AP Mode.

See

Chapter 6 on page 93

for an example of setting up a wireless network in

AP mode.

4.1 AP Mode Overview

Use your NBG334W as an AP if you already have a router or gateway on your network. In this
mode your device bridges a wired network (LAN) and wireless LAN (WLAN) in the same
subnet. See the figure below for an example.

Figure 28 Wireless Internet Access in AP Mode

4.2 Setting your NBG334W to AP Mode

1 Log into the web configurator if you haven’t already. See the Quick start Guide for

instructions on how to do this.

2 To set your NBG334W to AP Mode, go to Maintenance > Sys OP Mode > General

and select Access Point.