1 rule configuration – ZyXEL Communications NBG334W User Manual
Page 167
Chapter 16 Bandwidth Management
NBG334W User’s Guide
167
16.9.1 Rule Configuration
If you want to edit a bandwidth management rule for other applications and/or subnets, click
the Edit icon in the Application List or User-defined Service table of the Advanced screen.
The following screen displays.
Figure 90 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
Configuration
The following table describes the labels in this screen
Table 68 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
Enable
Select this check box to have the NBG334W apply this bandwidth management
rule.
Direction
Select To LAN to apply bandwidth management to traffic that the NBG334W
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the NBG334W
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the NBG334W
forwards to the WLAN.
Service Name
Enter a descriptive name of up to 19 alphanumeric characters, including spaces.
Priority
Select a priority from the drop down list box. Choose High, Mid or Low.
Modify
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule
or create a new rule in the Rule Configuration screen. See
Click the Remove icon to delete a rule.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.
Table 67 Management > Bandwidth MGMT > Advanced (continued)
LABEL
DESCRIPTION