ZyXEL Communications NBG334W - Manual (Page 119)

Chapter 9 Guest WLAN
NBG334W User’s Guide
119
To change your NBG334W’s MAC filter settings for guest wireless network, click Network >
Guest WLAN > MAC Filter. The screen appears as shown.
Figure 65 Network > Guest WLAN > MAC Filter
The following table describes the labels in this menu.
9.3 Guest WLAN IP Screen
Click Network > Guest WLAN > IP. The screen appears as shown.
Table 45 Network > Guest WLAN > MAC Filter
LABEL DESCRIPTION
Active Select the check box to enable MAC address filtering for the Guest WLAN.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG334W, MAC addresses not listed will be
allowed to access the NBG334W
Select Allow to permit access to the NBG334W, MAC addresses not listed will be
denied access to the NBG334W.
Set This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG334W in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the NBG334W.
Reset Click Reset to reload the previous configuration for this screen.