ZyXEL Communications NBG334W - Manual (Page 229)

NBG334W User’s Guide
229
A
P P E N D I X
A
Product Specifications and Wall-
Mounting Instructions
The following tables summarize the NBG334W’s hardware and firmware features.
Table 100 Hardware Features
Dimensions (W x D x H) 162 x 115 x 33 mm
Weight 237g
Power Specification Input: 120~240 AC, 50~60 Hz
Output: 12 V AC 1 A
Ethernet ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
4-5 Port Switch A combination of switch and router makes your NBG334W a cost-effective
and viable network solution. You can add up to four computers to the
NBG334W without the cost of a hub when connecting to the Internet
through the WAN port. You can add up to five computers to the NBG334W
when you connect to the Internet in AP mode. Add more than four
computers to your LAN by using a hub.
LEDs PWR, LAN1-4, WAN, WLAN, WPS
Reset Button The reset button is built into the rear panel. Use this button to restore the
NBG334W to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
Antenna The NBG334W is equipped with a 2dBi detachable antenna to provide clear
radio transmission and reception on the wireless network.
Operation Environment Temperature: 0º C ~ 40º C
Humidity: 20% ~ 85% RH (Non-condensing)
Storage Environment Temperature: -20º C ~ 60º C
Humidity: 20% ~ 90% RH (Non-condensing)
Distance between the
centers of the holes on
the device’s back.
125 mm
Screw size for wall-
mounting
M3*10
Table 101 Firmware Features
FEATURE DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)