ZyXEL Communications NBG334W - Manual (Page 41)

Chapter 2 Introducing the Web Configurator
NBG334W User’s Guide
41
The following table describes the sub-menus.
Table 5 Screens Summary
LINK TAB FUNCTION
Status This screen shows the NBG334W’s general device, system and
interface status information. Use this screen to access the wizard,
and summary statistics tables.
Network
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG334W to block
access to devices or block the devices from accessing the
NBG334W.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN IP
address assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure other advanced properties.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to partition your LAN interface into subnets.
Advanced Use this screen to enable other advanced properties.
Guest WLAN General Use this screen to configure guest wireless LAN settings.
MAC Filter Use this screen to configure the NBG334W to block access to
guest devices or block the guest devices from accessing the
NBG334W.
IP Use this screen to configure guest wireless LAN IP address.
Bandwidth Use this screen to configure bandwidth settings for the guest
wireless network.
DHCP
Server
General Use this screen to enable the NBG334W’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
Client List Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host name).
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG334W.
Advanced Use this screen to change your NBG334W’s port triggering
settings.
DDNS General Use this screen to set up dynamic DNS.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.