ZyXEL Communications NBG334W - Manual (Page 204)

Chapter 20 Logs
NBG334W User’s Guide
204
Local User Database does not
support authentication method. A user tried to use an authentication method that the
local user database does not support (it only supports
EAP-MD5).
No response from RADIUS. Pls
check RADIUS Server. There is no response message from the RADIUS server,
please check the RADIUS server.
Use Local User Database to
authenticate user. The local user database is operating as the
authentication server.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
server.
No Server to authenticate user. There is no authentication server to authenticate a user.
Local User Database does not
find user`s credential. A user was not authenticated by the local user database
because the user is not listed in the local user database.
Table 91 ACL Setting Notes
PACKET DIRECTION DIRECTION DESCRIPTION
(L to W) LAN to WAN ACL set for packets traveling from the LAN to the WAN.
(W to L) WAN to LAN ACL set for packets traveling from the WAN to the LAN.
(L to L/P) LAN to LAN/
NBG334W
ACL set for packets traveling from the LAN to the LAN or
the NBG334W.
(W to W/P) WAN to WAN/
NBG334W
ACL set for packets traveling from the WAN to the WAN
or the NBG334W.
Table 92 ICMP Notes
TYPE CODE DESCRIPTION
0 Echo Reply
0 Echo reply message
3 Destination Unreachable
0 Net unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
5 Source route failed
4 Source Quench
0 A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
5 Redirect
0 Redirect datagrams for the Network
1 Redirect datagrams for the Host
Table 90 802.1X Logs (continued)
LOG MESSAGE DESCRIPTION