Xerox Document WorkCentre 450C - Manual (Page 85)

85
Set Date and Time From PC
Click to use the date and time set on your PC for the
WorkCentre.
Maximum fax speed
Sets the maximum speed at which a fax is initially
sent. The WorkCentre automatically lowers the
speed as needed.
ECM (error correct mode)
Monitors the phone line for errors and, if an error
occurs, resends any portion of the document until
the transmission is complete. When using ECM, the
fax transmission time can be longer, but the
complete fax is sent.
Permit remote test
Allows a Xerox Customer Support representative to
perform remote testing on the WorkCentre.
5. Do one of the following:
• Click OK to change the options at the WorkCentre
and close the WorkCentre 450c Settings window.
• Click Apply to change the options at the
WorkCentre and keep the WorkCentre 450c Settings
window open.