Xerox Document WorkCentre 450C - Manual (Page 74)

74
12. Do one of the following:
• Press START to begin the fax transmission.
• Press ENTER , add another fax number, and then
press START .
Note After the fax is sent, you may want to change
the PAUSE key setting to pause only. Repeat steps
1 through 5 and choose pause only in step 5.
Combining several numbers
during a single dialing sequence
You can combine a fax number, speed dial numbers, and
access numbers during a single dialing sequence. For
example, you may have created a speed dial number for
your long-distance service and another speed dial number
for your charge code your company provides. You could
dial all the numbers at one time to send a fax to a number
that requires the long-distance service.
1. At the WorkCentre 450c, load up to 20 pages face
down in the document tray.
2. To enter the first number, do one of the following:
• Using the numeric keypad, enter the number.
• Press
SPEED DIAL and enter the speed dial
number.