Setting copy collation before copying a document – Xerox Document WorkCentre 450C User Manual

Page 157

Text mode
Original mode

157

Setting copy collation before
copying a document

By default, the WorkCentre does not collate multiple
copies. You can change the default setting at the control
panel to have the WorkCentre always collate multiple
copies.

Note The WorkCentre stores the document to
memory before printing the collated copies. If the
WorkCentre’s memory runs low, it will not collate the
copies.

1. At the WorkCentre 450c, press

2. Press 5 [Setup] and

ENTER

3. Press 7 [Control panel] and

ENTER

4. Press 7 [Collate copies] and

ENTER

5. Press

RIGHT ARROW

to display [yes] and

ENTER

6. Press

STOP

to exit the menus.

The WorkCentre is set to collate multiple copies of the
same document. To copy a document, see the previous
section, “Copying a document.