Xerox Document WorkCentre 450C - Manual (Page 185)

185
Cannot run PC scan
application. After pressing the
SCAN
key,
the system could not run
the scanning application on
your PC.
Do one or more of the
following:
1.Make sure you installed
a scanning application on
your PC.
2.Open the ControlCentre
Properties dialog box and
make sure the application’s
location appears in the Run
scanning application box.
Cartridge error.
Check printed
pages. Part of your document may
not have printed completely
because of an ink cartridge
problem. Check the printed pages
and reprint any pages as
needed.
Change ink:
CARTRIDGE
key. Check
prints.
The WorkCentre ran out of
ink while printing an
incoming fax. The last
page printed and any
following pages are stored
to memory, provided there
is enough memory. Install a new ink cartridge.
After installing the
cartridge, press
START to
print the pages stored to
memory.
Close printer
cover. The printer cover is open. Close the printer cover.
Color head low.
START if OK, or
CARTRIDGE .
You may need to replace
the color print head. Check your printed pages.
If the print quality is good,
press
START to clear the
message and continue
using the print head. If the
quality is poor, replace the
color print head.
Message Meaning Action