Xerox Document WorkCentre 450C - Manual (Page 103)

103
Printing a fax stored to memory
You should print a fax stored to memory to free up memory
on the WorkCentre. After you print the fax, it is deleted
from memory.
1. At the WorkCentre 450c, press the
MENU key.
2. Press 4 [Fax Mail] and ENTER .
3. Press ENTER to select [Print memory doc].
4. Enter your four-digit security password and press
ENTER .
The WorkCentre prints the fax and deletes it from memory.
Manually receiving a fax
If you are receiving both fax and voice calls on the same
telephone line and the Answer mode is set to manual, you
will answer both telephone and fax calls on the same line.
1. Pick up your telephone handset to answer the incoming
call. The control panel LCD displays:
Press START
to send or receive
2. At the WorkCentre 450c, press the START key.
3. Hang up the telephone.
The WorkCentre receives the incoming fax.