Xerox Document WorkCentre 450C - Manual (Page 111)

111
• If you’re retrieving the faxes stored to memory,
press the password used to enable security and ##.
For example, the complete key sequence is:
#**3# password ##
6. By default, the WorkCentre deletes the fax after it’s
sent. To change the default, press one of the following:
• 1 to save the fax on your WorkCentre after
transmission.
• 2 to print the fax on your WorkCentre, then delete it
after transmission.
7. Remain on the line until you hear three beeps, which
means the WorkCentre received your request, and then
press the
START key on the fax machine.
8. Hang up the telephone.
Retrieving your faxes using a telephone not
connected to the remote fax machine
1. Lift the telephone handset and wait for a dial tone.
2. Dial your WorkCentre’s fax number.
After the WorkCentre answers, you hear a fax tone
sequence.
3. When you hear a pause in the tone sequence, press #
and wait for three confirmation tones.
4. Press **4# .