Xerox Document WorkCentre 450C - Manual (Page 112)

112
5. Do one of the following:
• If you’re retrieving faxes from your mailbox, press
your mailbox password and #.
• If you’re retrieving the faxes stored to memory,
press the password used to enable security and #.
6. Dial the fax number of the machine you want the faxes
sent to and press ##.
For example, the complete key sequence is as follows:
#**4# password # fax number ##
7. By default, the WorkCentre deletes the fax after it’s
sent. To change the default, press one of the following:
• 1 to save the fax on your WorkCentre after
transmission.
• 2 to print the fax on your WorkCentre, then delete it
after transmission.
Remain on the line until you hear three beeps, which means
the WorkCentre received your request, and then hang up
the telephone.