Xerox Document WorkCentre 450C - Manual (Page 18)

18
Setting the ControlCentre
properties
Using the ControlCentre Properties dialog box, you can
change the conditions under which the WorkCentre Status
window automatically opens on your desktop. For
example, you can set the window to open any time an error
occurs, such as when the WorkCentre is out of paper or ink.
You also use the dialog box to choose which scanning
application to run when you press the SCAN key on the
WorkCentre control panel.
1. At your PC, do one of the following:
• In Windows 95, click the WorkCentre icon on the
taskbar with the right mouse button and then click
Properties.
• In Windows 3.1 or 3.11, click the WorkCentre icon
on the desktop with the left mouse button and then
click Properties.
The ControlCentre Properties dialog box displays.
2. Under Display status window, click one of the
following:
• At start-up, to open the WorkCentre Status window
when you run Windows.