Xerox Document WorkCentre 450C - Manual (Page 198)

198
Understand error codes
This section lists the error codes you may see the
WorkCentre LCD and in printed reports. An error code
indicates a problem occurred during fax transmissions or
reception.
Code Meaning Action
E001 Communication ended
without errors. No action.
E003 The remote machine sent a
disconnect signal while the
WorkCentre was waiting
for the remote machine to
identify its capabilities. Retry the operation. If
unsuccessful, test with a
known good machine.
E004 The telephone line dropped
while communicating with
the remote machine. Call the remote machine
with a handset to verify the
phone line is good. Then
retry the operation.
E005 The remote machine did not
respond while the
WorkCentre was waiting
for a confirmation to send.
The remote user may have
stopped the fax machine
while receiving, or the
telephone line could be
bad. Call the remote machine
with a handset to verify the
phone line is good.