ZyXEL Communications NBG4115 - Manual (Page 97)

Chapter 7 Wireless LAN
User’s Guide
97
7.6 WPS
Use this screen to enable/disable WPS, view or generate a new PIN number and
check current WPS status.
To open this screen, click Network > Wireless LAN > WPS tab.
Figure 50 WPS
The following table describes the labels in this screen.
Table 33 WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS
Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate
to generate a new PIN number.
WPS Status
Status
This displays Configured when the NBG4115 has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the NBG4115 or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
Release
Configuration This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the NBG4115.