beautypg.com

Linux – ZyXEL Communications NBG4115 User Manual

Page 246

background image

Appendix D Setting up Your Computer’s IP Address

User’s Guide

246

4

For statically assigned settings, do the following:

• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Prestige in the Router address box.

5

Click Apply Now and close the window.

6

Turn on your Prestige and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red
Hat Linux 9.0. Procedure, screens and file location may vary depending on your
Linux distribution and release version.

Note: Make sure you are logged in as the root administrator.

Using the K Desktop Environment (KDE)

Follow the steps below to configure your computer IP address using the KDE.

1

Click the Red Hat button (located on the bottom left corner), select System
Setting
and click Network.

Figure 141 Red Hat 9.0: KDE: Network Configuration: Devices