ZyXEL Communications NBG4115 - Manual (Page 117)

Chapter 9 LAN
User’s Guide
117
9.3 IP
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 61 Network > LAN > IP
The following table describes the labels in this screen.
Table 41 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your NBG4115 in dotted decimal notation
192.168.1.1 (factory default).
IP Subnet Mask The subnet mask specifies the network number portion of an IP
address. Your NBG4115 will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG4115.
Apply Click Apply to save your changes back to the NBG4115.
Reset Click Reset to begin configuring this screen afresh.