ZyXEL Communications NBG4115 - Manual (Page 75)

Chapter 6 Tutorials
User’s Guide
75
In the following screen, you set the priorities for VoIP and e-mail.
Figure 37 Tutorial: Priority Queue
Click Enable for the VoIP (SIP) service and set priority to High. Do the same for
E-mail. For the rest of the applications, click Enable if you need these services
and set the priority to Low.
Note: You can also leave the Enable field blank for the rest of the applications. In
doing so, the NBG4115 does not apply bandwidth management to these
services.
6.6.2 Custom Bandwidth Management
Aside from the VOIP and e-mail services, you need to set the priority for MSN
Messenger. To do this, add the service in the Priority Queue table of the
Management > Bandwidth MGMT > Advanced screen.
Figure 38 Tutorial: Adding TFTP to Priority Queue
To add the MSN Messenger service in the Priority Queue: