Xerox 700 - Manual (Page 74)

T ROUBLESHOOTING 74
Cannot connect to the Integrated Fiery Color Server with Command
WorkStation
If there is a problem connecting to the Integrated Fiery Color Server, an error message is
displayed.
The problem can occur when:
• The Integrated Fiery Color Server is initially turned on
• The Integrated Fiery Color Server restarts
• You have changed settings affecting the server address and have not reconfigured the
connection to the server
If you experience this problem, try the following solutions, in this order:
• A remote computer running utilities or WebTools may be interfering by obtaining status
information. If possible, close the remote application, and try to connect again.
• Restart the Command WorkStation software and try to connect again.
• Restart the Integrated Fiery Color Server.