Xerox 700 - Manual (Page 71)

A DMINISTERING THE F IERY C ONTROLLER 71
Shutting down, rebooting, and restarting the Integrated Fiery Color
Server
Generally, you can leave the Integrated Fiery Color Server and the digital press running all the
time. This section describes how to shut down, reboot, and restart the Integrated Fiery Color
Server when necessary.
Shutting down the Integrated Fiery Color Server
When you need to shut down the Integrated Fiery Color Server, fonts downloaded to the
Integrated Fiery Color Server are not deleted. Jobs in the Hold and Print queues and jobs that
have been processed but not printed are not deleted and are available for printing when you
reboot or restart the Integrated Fiery Color Server.
T O SHUT DOWN THE I NTEGRATED F IERY C OLOR S ERVER
1 Make sure that the Integrated Fiery Color Server is not receiving, processing, or printing any
files.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
2 Press the digital press main On/Off button.
Rebooting or restarting the Integrated Fiery Color Server
Restarting the Integrated Fiery Color Server resets the Integrated Fiery Color Server system
software, but does not reboot the entire system. Network access to the Integrated Fiery Color
Server is temporarily interrupted and all currently processing jobs are terminated.
If you use a USB thumb drive, remove it before rebooting. Otherwise, the Integrated Fiery
Color Server does not reboot.
T O REBOOT OR RESTART THE I NTEGRATED F IERY C OLOR S ERVER FROM THE DIGITAL PRESS CONTROL PANEL
1 Make sure the Integrated Fiery Color Server is not receiving, processing, or printing any files.
2 Press Web Applications > Setup > Restart Server, and select either Reboot System or Restart
Server.
3 Press the All Services button to exit.
T O REBOOT OR RESTART THE I NTEGRATED F IERY C OLOR S ERVER FROM C OMMAND W ORK S TATION
1 Make sure that the Integrated Fiery Color Server is not receiving, processing, or printing any
files.
2 In Command WorkStation, choose Restart Server or Reboot Server from the Server menu.