Calibrate tab, Setup tab – Xerox 700 User Manual
Page 28
S
ETTING
UP
THE
I
NTEGRATED
F
IERY
C
OLOR
S
ERVER
FROM
THE
DIGITAL
PRESS
CONTROL
PANEL
28
Calibrate tab
Calibrate the Integrated Fiery Color Server using ColorCal. For more information, see
Color
Printing
. If an Administrator password has been set, you must enter it to access Calibration.
Setup tab
The Setup tab allows you to configure the Integrated Fiery Color Server so that it can be
operational on your network. Other administrative commands, such as changing passwords
and clearing the Integrated Fiery Color Server, are available. Descriptions for Setup options
begin on
.
You must enter the Administrator password to access the following submenus:
In addition, anyone can use the following commands without entering a password:
Printer Setup,
Network Setup,
Services
Configure the Integrated Fiery Color Server so that it can be operational on your network.
You also set default print settings that are applied if jobs do not contain the appropriate
information (for example, the color mode).
Change Password
Change the Administrator and Operator passwords. For more information, see
Clear Server
Clear all jobs in all Integrated Fiery Color Server queues, as well as all jobs archived on the
Integrated Fiery Color Server hard disk, the index of archived jobs (in the Archive window),
all FreeForm masters, and the index of FreeForm masters (in the FreeForm window).
Consult with your administrator or operator before choosing Clear Server.
Restart Server
Reset the system software without rebooting the entire system. Network access to the
Integrated Fiery Color Server is temporarily interrupted and all currently processing jobs are
aborted and may be lost.
Factory Defaults
Restore the Integrated Fiery Color Server to the default settings. For more information, see
.
Align Tray
Adjust the placement of text and images on a page so that they are correctly aligned on the
sheet of paper and both sides of a duplex sheet have the exact same alignment. For more
information about this function, see
Utilities
.
Setup Summary
Display the current settings for Integrated Fiery Color Server Setup.
Run Diagnostics
These functions are reserved for service technicians.