Xerox 700 - Manual (Page 10)

C ONNECTING TO THE N ETWORK 10
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
1 Configuring the network environment
Configure network servers to provide users with access to the Integrated Fiery Color Server as
a networked printer. For information about configuring network servers in Windows and
UNIX network environments as they relate specifically to the Integrated Fiery Color Server,
see
page 12 . For information about using your network, see your network documentation.
2 Physically connecting the Integrated Fiery Color Server to a functioning network
Prepare a network node for the Integrated Fiery Color Server. Obtain cable, route it to the
location where the Integrated Fiery Color Server is to be installed, and attach the cable to the
network connector of the Integrated Fiery Color Server. For details, see
page 19 .
3 Setting up the Integrated Fiery Color Server
Configure the Integrated Fiery Color Server for your printing and network environment
(see
page 22 and page 53 ).
4 Preparing user computers for printing
Install the files needed for printing, install user software, and connect the user computers to
the network. The software installation is described in
Printing from Windows and Printing
from Mac OS .
5 Administering the Integrated Fiery Color Server
Monitor and maintain system performance and troubleshoot problems that may arise
(see
“Administering the Fiery Controller” on page 58).