Xerox 700 - Manual (Page 24)

S ETTING UP THE I NTEGRATED F IERY C OLOR S ERVER FROM THE DIGITAL PRESS
CONTROL PANEL
24
3 Make sure that the Integrated Fiery Color Server is Idle.
In the upper-left corner of the Main tab, make sure that Idle is displayed. If Printing or
RIPping appears, the Integrated Fiery Color Server is processing, and you must wait until the
system finishes and reaches the Idle state.
4 Press the Setup tab.
5 Press the Password field and use the keyboard on the digital press control panel to type the
Administrator password.
6 Press Save and then press Login.
7 Press the button for the Setup you want to access.
8 Perform Printer Setup, Network Setup, and Services, in that order.
Descriptions of Setup options begin on page 29 .
9 Change the Administrator password to protect your Setup from unauthorized changes.
For information, see page 59 .
About the digital press control panel Setup interface
When you perform Setup from the digital press control panel, you can select one menu after
another and enter information about your Integrated Fiery Color Server and your network
and printing environment.
When you perform a function from the digital press control panel that prompts you for the
Administrator password, you must enter it promptly. Otherwise, the digital press control
panel returns to Idle, and you must start over.
Some of the menus you see are shown on the Control Panel Map, a high-level guide to Setup
that you can print from the digital press control panel.
T O PRINT THE C ONTROL P ANEL M AP
1 At the digital press, press the Services button.
2 On the digital press control panel press All Services, and then press Web Applications.
3 Press Info.
4 Press Control Panel Map.
5 At the confirmation screen, press Yes.