Xerox 700 - Manual (Page 38)

S ETTING UP THE I NTEGRATED F IERY C OLOR S ERVER FROM THE DIGITAL PRESS
CONTROL PANEL
38
DNS Setup
You can configure the Integrated Fiery Color Server so that it can access an appropriate DNS
server. With the DNS server, when connecting the utilities or WebTools from remote
computers to the Integrated Fiery Color Server, users need to remember only its Server Name,
which is easier to remember than an IP address.
Enable DNS
Select this option if you have a DNS server connected to your network and if you want to
allow the Integrated Fiery Color Server to resolve a name to an IP address.
DNS Address
Automatic, Manual
Choose whether to allow the Integrated Fiery Color Server to get its DNS address
automatically. To use this option, you must first select Automatic for IPv4 Address type
(
page 36 ).
Depending on your selection, configure the appropriate options, as follows:
N OTE : When you change Domain Name, the Server Name ( page 29 ) and Windows Printing
Server Name ( page 39 ) change also.
Network Setup
TCP/IP
DNS
If you choose Automatic
for DNS Address
If you choose Manual
for DNS Address
Domain Name
Enter the DNS domain name of the Integrated
Fiery Color Server.
Primary DNS
127.0.0.1
Specify the IP address of the primary DNS server.
Secondary DNS
0.0.0.0
Specify the IP address of the secondary
DNS server.
Domain Name
Enter the DNS domain name of the
Integrated Fiery Color Server.