Xerox 700 - Manual (Page 54)

S ETUP OPTION REFERENCE 54
S
ETUP OPTION REFERENCE
This chapter describes the default settings that you can set for the following groups of
Setup options:
• PS (PostScript) Setup
• PCL Setup
Depending on the Setup method that you use (WebTools Configure or digital press control
panel), not all options are available. For more information about print options, see
Print
Options .
Setup options
To determine the current Setup defaults, print the Configuration page from
Command WorkStation.
Option Settings
(default is underlined)
Description
Allow Courier
Substitution Yes, No Specify whether to substitute Courier for fonts that are unavailable when
you download files to the Integrated Fiery Color Server, or when you
print a document for which you do not have the corresponding printer
font. If this option is set to No, jobs with fonts that are unavailable on
the Integrated Fiery Color Server hard disk generate a PostScript error
and do not print. This setting does not apply to PDF files; font
substitution occurs automatically in PDF files.
Append CR to LF Yes, No Specify whether to append a carriage return to each line feed.
Auto Trapping On, Off
Color Mode CMYK, Grayscale Specify whether to print color (CMYK) or Grayscale images to the
Integrated Fiery Color Server by default. CMYK gives you full color
prints. Select CMYK as the Color Mode before performing calibration
on the Integrated Fiery Color Server. Grayscale converts all colors into
shades of gray.
Convert Paper Sizes No, Letter/Tabloid->A4/A3,
A4/A3->Letter/Tabloid
Converts paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a letter
size document is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option.
For example, if Convert Paper Sizes is set to Letter/Tabloid->A4/A3, and
Default Paper Sizes is set to US, jobs are printed A4/A3 size. This also
includes Integrated Fiery Color Server system pages such as the Start
Page, Test Page, and Job Log.