About setup, Setup from the digital press control panel, Setup from a network computer – Xerox 700 User Manual
Page 21
P
REPARING
FOR
F
IERY
C
ONTROLLER
S
ETUP
21
About Setup
Setup configures the Integrated Fiery Color Server to communicate with other devices and to
manage print jobs. Perform Setup the first time you turn on the Integrated Fiery Color Server
after new system software is loaded, or any time Server software is reinstalled. When the
network or user printing environment changes, change the options accordingly.
N
OTE
:
You cannot access Setup functions from Command WorkStation, Macintosh Edition.
Setup from the digital press control panel
Make settings for Printer Setup, Network Setup, and Services, in that sequence. After the
initial Setup, you can change Setup options from the digital press control panel (
) or a
). Most Setup options can be set using either of these methods.
If you do not make settings in the remaining Setup menus, the Integrated Fiery Color Server
uses default settings. You must choose settings appropriate for the printing environment at
your site.
Setup from a network computer
To set up the Integrated Fiery Color Server from a network computer, use Configure
(
). Access Configure either from WebTools or Command WorkStation, Windows
Edition.