Xerox 700 - Manual (Page 43)

S ETTING UP THE I NTEGRATED F IERY C OLOR S ERVER FROM THE DIGITAL PRESS
CONTROL PANEL
43
AppleTalk Setup
Enable AppleTalk
Select this option if you have an AppleTalk network connected to the Integrated Fiery Color
Server. This setting enables the Integrated Fiery Color Server to communicate over AppleTalk
networks.
AppleTalk Zone
List of zones
The Integrated Fiery Color Server searches the network for AppleTalk zones in your network
segment. Select the AppleTalk zone in which you want the Integrated Fiery Color Server to
appear. If your segment has only one zone, the Integrated Fiery Color Server is assigned to
that zone automatically.
The message “No AppleTalk zone found” may mean your network has no zones, or the
network cable is not connected.
Services options
With the Services menu, you can enable services such as LPD and FTP. To access the Setup
menu, follow the instructions on
page 23 .
SMB (Windows Setup), LPD, and Web Setup
Enable Windows Printing
Server Message Block (SMB), also known as Windows printing, is the file and printer sharing
protocol built into Windows. Enabling SMB allows the Integrated Fiery Color Server to
be listed on the network so that Windows clients can print to a particular print connection
(Hold, Print, or Direct) on the Integrated Fiery Color Server without any other networking
software. For information about setting up a Windows computer for Windows printing, see
Printing from Windows and your Windows documentation. Windows printing runs via
TCP/IP, so you must configure TCP/IP on the Integrated Fiery Color Server and on all
computers that use Windows printing.
Network Setup
AppleTalk
Services
SMB, LPD & Web