Xerox 700 - Manual (Page 20)

P REPARING FOR F IERY C ONTROLLER S ETUP 20
Back view of the Integrated Fiery Color Server
Ethernet connection
For Ethernet connections, the Integrated Fiery Color Server supports Unshielded Twisted Pair
(UTP) cabling for these network speeds:
• 10BaseT: Category 3 or higher
• 100BaseTX: Category 5 or higher (4-pair/8-wire, short-length)
• 1000BaseT: Category 5e or higher (4-pair/8-wire, short-length)
T O CONNECT TO THE NETWORK
1 Power off the digital press and Integrated Fiery Color Server.
For information about the proper procedures, see page 71 .
2 Connect the scan crossover cable from the Integrated Fiery Color Server to the scan port on
the digital press.
3 Connect the network cable from the network to the appropriate network connector (RJ-45)
on the back of the Integrated Fiery Color Server.
4 Power on the Integrated Fiery Color Server and the digital press.
1 Power connector
2 Power button
3 Scan crossover cable
connector
4 Network connector
5 Digital press connector
6 USB connectors
1
2
3
4
5
6