Port 9100 and ftp setup – Xerox 700 User Manual
Page 44
S
ETTING
UP
THE
I
NTEGRATED
F
IERY
C
OLOR
S
ERVER
FROM
THE
DIGITAL
PRESS
CONTROL
PANEL
44
Set Driver Type
PS, PCL
Choose the type of printer driver to download to a Windows computer when a user installs a
printer with the Point and Print method of installation.
Enable LPD
Select this option to allow LPD printing.
Default LPD Queue
Print Queue, Hold Queue, virtual printers
Choose the default connection for LPD printing if it is not set by the user.
Enable IPP
Select this option to enable printing with the Internet Printing Protocol (IPP). For
information about setting up user computers to use IPP printing, see
Printing from Windows
.
Port 9100 and FTP Setup
Enable Port 9100
Select this option to enable applications to open a TCP/IP socket to the Integrated Fiery
Color Server at Port 9100 to download a print job.
Port 9100 Queue
Direct Connection, Print Queue, Hold Queue
Specify the Integrated Fiery Color Server print connection for downloading jobs to Port
9100. Only the print connections you have enabled (
) are available.
Enable FTP
Select this option to enable FTP printing on the Integrated Fiery Color Server.
N
OTE
:
FTP printing is supported for Windows, Mac OS, UNIX, Linux and other operating
systems supporting the FTP protocol. The Integrated Fiery Color Server serves as an FTP
server in compliance with RFC959, although all the functionality described in RFC959 is not
supported.
Services
Port 9100 & FTP