ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 67)

P-2302HW/HWL-P1 Series User’s Guide
Chapter 3 Wizard Setup 67
3.3.1 SIP Settings
Figure 23 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 18 VoIP Setup Wizard > SIP Settings
LABEL DESCRIPTION
SIP1 Settings
SIP2 Settings
SIP Number Enter your SIP number. In the full SIP URI (like [email protected] ), this is
the part before the @ symbol. You can use up to 127 printable ASCII characters.
SIP Server
Address Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
SIP Service
Domain Enter the SIP service domain name. In the full SIP URI (like 1234@VoIP-
provider.com ), this is the part after the @ symbol. You can use up to 127 printable
ASCII Extended set characters.
Authentication
User Name Enter the user name for registering this SIP account, exactly as it was given to you.
You can use up to 95 printable ASCII characters.
Password Enter the user name for registering this SIP account, exactly as it was given to you.
You can use up to 95 printable ASCII Extended set characters.