beautypg.com

2 firewall services screen – ZyXEL Communications P-2302HWL-P1 Series User Manual

Page 194

background image

P-2302HW/HWL-P1 Series User’s Guide

194

Chapter 14 Firewall

14.3.2 Firewall Services Screen

Use this screen to enable service blocking, to set up the date and time service blocking is
effective, and to maintain the list of services you want to block. To access this screen, click
Security > Firewall > Services.

Max NAT/Firewall
Session Per User

Select the maximum number of NAT rules and firewall rules the ZyXEL Device
enforces at one time. The ZyXEL Device automatically allocates memory for the
maximum number of rules, regardless of whether or not there is a rule to enforce.
This is the same number you enter in Network > NAT > General.

Packet Direction

This field displays each direction that packets pass through the ZyXEL Device.

Log

Select the situations in which you want to create log entries for firewall events.

No Log - do not create any log entries

Log Blocked - (LAN to WAN only) create log entries when packets are blocked

Log Forwarded - (WAN to LAN only) create log entries when packets are
forwarded

Log All - create log entries for every packet

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 79 Security > Firewall > General

LABEL

DESCRIPTION

This manual is related to the following products: