2 advanced analog phone setup screen – ZyXEL Communications P-2302HWL-P1 Series User Manual
Page 160
P-2302HW/HWL-P1 Series User’s Guide
160
Chapter 10 Phone
10.2.2 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
SIP2
Select this if you want this phone port to use the SIP2 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use the SIP account
which was registered last.
Incoming Call
apply to
SIP1
Select this if you want to receive phone calls for the SIP1 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
SIP2
Select this if you want to receive phone calls for the SIP2 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
PSTN Line
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Cancel
Click this to set every field in this screen to its last-saved value.
Advanced Setup
Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
Table 65 VoIP > Phone > Analog Phone
LABEL
DESCRIPTION