3 wireless network setup, 1 wireless lan - general information, Figure 11 connection wizard > system information – ZyXEL Communications P-2302HWL-P1 Series User Manual
Page 54: Table 6 connection wizard > system information
P-2302HW/HWL-P1 Series User’s Guide
54
Chapter 3 Wizard Setup
Figure 11 Connection Wizard > System Information
The following table describes the labels in this screen.
3.2.3 Wireless Network Setup
Use the following screens to set up your wireless LAN.
3.2.3.1 Wireless LAN - General Information
Configure your wireless settings in this screen, then click Next.
Table 6 Connection Wizard > System Information
LABEL
DESCRIPTION
System Name
Enter your computer's "Computer Name". See
for more
information. This is for identification purposes, but some ISPs also check this field.
This name can be up to 30 alphanumeric characters long. Spaces are not allowed,
but dashes “-” and underscores "_" are accepted.
Domain Name
Enter the domain name entry that is sent to DHCP clients on the LAN. If you leave
this blank, the domain name obtained from the ISP is used. Use up to 38
alphanumeric characters. Spaces are not allowed, but dashes “-” and periods "."
are accepted.
< Back
Click this to go to the previous screen.
Next >
Click this to go to the next screen.
Exit
Click this to close this screen and return to the main screen.