ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 266)

P-2302HW/HWL-P1 Series User’s Guide
266 Chapter 22 Tools
Figure 145 Maintenance > Tools > Firmware
Each field is described in the following table.
22.2.2 Firmware Upload Screens
Note: Do not turn off the device while firmware upload is in progress!
When the ZyXEL Device starts to upload firmware, the Firmware Upload in Process screen
appears.
Table 125 Maintenance > Tools > Firmware
LABEL DESCRIPTION
File Path Enter the location of the .bin file you want to upload, or click Browse... to find it.
You must decompress compressed (.zip) files before you can upload them.
Browse... Click this to find the .bin file you want to upload.
Upload Click this to begin uploading the selected file. This may take up to two minutes.
See
Section 22.2.2 on page 266 for more information about this process.
Note: Do not turn off the device while firmware upload is in
progress!