ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 59)

P-2302HW/HWL-P1 Series User’s Guide
Chapter 3 Wizard Setup 59
Figure 16 Connection Wizard > ISP Parameters (Ethernet)
The following table describes the labels in this screen.
3.2.4.2 PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) standard specifying how a host personal computer
interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access
to high-speed data networks.
Note: You cannot use the Connection Wizard if the PPPoE remote server cannot be
discovered automatically. You must use the screens discussed in Chapter 6 on
page 105 instead.
Table 11 Connection Wizard > ISP Parameters (Ethernet)
LABEL DESCRIPTION
Connection Type Select Ethernet if you are connecting your ZyXEL Device to an existing network.
< Back Click this to go to the previous screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.