ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 256)

P-2302HW/HWL-P1 Series User’s Guide
256 Chapter 21 Logs
21.3 Log Message Descriptions
The following tables provide descriptions of example log messages.
Table 110 System Error Logs
LOG MESSAGE DESCRIPTION
WAN connection is down. The WAN connection is down. You cannot access the network
through this interface.
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
Table 111 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time synchronization is
successful
The device has adjusted its time based on information from
the time server.
Time synchronization failed The device failed to get information from the time server.
WAN interface gets IP: %s The WAN interface got a new IP address from the DHCP or
PPPoE server.
DHCP client IP expired A DHCP client's IP address has expired.
DHCP server assigns %s The DHCP server assigned an IP address to a client.
Successful WEB login Someone has logged on to the device's web configurator
interface.
WEB login failed Someone has failed to log on to the device's web configurator
interface.
Successful TELNET login Someone has logged on to the router via telnet.
TELNET login failed Someone has failed to log on to the router via telnet.
Successful FTP login Someone has logged on to the device via ftp.
FTP login failed Someone has failed to log on to the device via ftp.
NAT Session Table is Full! The maximum number of NAT session table entries has been
exceeded and the table is full.
Time initialized by Datetime
server: %s
The device got the time and date from the Datetime server.
Time initialized by Time
server
The device got the time and date from the time server.
Time initialized by NTP
server
The device got the time and date from the NTP server.
Failed to sync with Daytime
server: %s
The device was not able to connect to the Daytime server.
Failed to sync with Time
server: %s
The device was not able to connect to the Time server.
Failed to sync with NTP
server: %s
The device was not able to connect to the NTP server.