ZyXEL Communications P-2302HWL-P1 Series - Manual (Page 103)

P-2302HW/HWL-P1 Series User’s Guide
Chapter 5 Wireless LAN 103
5.7 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings, click the Advanced Setup button in
the General screen. The screen appears as shown.
Figure 51 Advanced
The following table describes the labels in this screen.
Table 41 Wireless LAN: Advanced
LABEL DESCRIPTION
Wireless Advanced Setup
RTS/CTS
Threshold Enter a value between 0 and 2432.
Fragmentation
Threshold It is the maximum data fragment size that can be sent. Enter a value between 256 and
2432.
802.11 Mode Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with
the ZyXEL Device.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with
the ZyXEL Device.
Select 802.11b/g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL
Device might be reduced.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.