Opening the display, Connecting the ac adaptor – Toshiba 6100 User Manual
Page 85
3-5
G
ETTING
S
TARTED
Connecting the AC adaptor
Opening the display
The display panel can be rotated in a wide range of angles for optimal viewing.
1.
Slide the display latch on the front of the computer to the right to unlatch the
display panel.
2.
Lift the panel up and adjust it to the best viewing angle for you.
NOTE: When you open the display, hold it with both hands and lift up
slowly.
Figure 3-2 Opening the display panel
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to operate
from AC power. It is also the fastest way to get started, because the battery pack
will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from 100 to 240
volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery
pack, refer to Chapter 6,
CAUTION: Use of the wrong adaptor could damage your computer.
TOSHIBA assumes no liability for any damage in such case. The current
rating for the computer is 5.0 amperes.