Memory expansion, Installing memory module, Memory expansion -6 – Toshiba 6100 User Manual
Page 160: Installing memory module -6
8-6
User’s Manual
O
PTIONAL
D
EVICES
3.
Grasp the card and remove it.
Figure 8-5 Removing an SD card
CAUTION: Make sure the SD card indicator is out before you remove
the card or turn off the computer’s power. If you remove the card or turn
off the power while the computer is accessing the card you may lose data
or damage the card.
Memory expansion
You can install additional memory in the computer’s memory module to increase the
amount of RAM.
CAUTION: Only memory modules with the following parts numbers can
be installed:
PA3126U-1M12:
128 MB
PA3127U-1M25:
256 MB
Installing memory module
To install a memory module, make sure the computer is in boot mode then:
1. Turn the computer off in boot mode. Refer to the
section in Chapter 3.
CAUTIONS: 1. If you use the computer for a long time, the memory
modules will become hot. In this case, let the memory
modules cool to room temperature before you replace
them.
SD
CARD
SD
CARD
INDICATOR