Toshiba 6100 User Manual
Page 123
T
HE
K
EYBOARD
5-5
Hibernation:
When you press
Fn + F4
, the computer can enter Hibernation. To
avoid entering Hibernation unexpectedly, a dialog box appears for verification.
However, if you check the checkbox in the dialog box, it will not appear from the next
time.
Display selection:
Press
Fn + F5
to change the active display device. When you
press these hot keys a dialog box appears. Only selectable devices will be displayed.
Hold down
Fn
and press
F5
again to change the device. When you release
Fn
and
F5
, the selected device will change. If you hold down the keys for three seconds the
selection will return to
LCD
.
Display Brightness:
Pressing
Fn + F6
decreases the display brightness in
increments. When you press these hotkeys, the current setting will be displayed for
two seconds by an icon. You can also change this setting through the Monitor
brightness item of the Power Save Mode window in Power Saver.
Display Brightness:
Pressing
Fn + F7
increases the display brightness in
increments. When you press these hotkeys, the current setting will be displayed for
two seconds by a pop-up icon. You can also change this setting through the
Monitor brightness item of the Power Save Mode window in Power Saver.
NOTE: You cannot change the display brightness for about 18 seconds
after the LCD turns on. To protect display quality, the brightness level is
set at the maximum value.
Soft keys: Fn key combinations