beautypg.com

Television, Ps/2 mouse, Television -16 ps/2 mouse -16 – Toshiba 6100 User Manual

Page 170

background image

8-16

User’s Manual

O

PTIONAL

D

EVICES

To change the display settings, press

Fn + F5

. If you disconnect the monitor

before you turn the computer off, be sure to press

Fn + F5

to switch to the internal

display. Refer to Chapter 5,

The Keyboard

, for details on using hotkeys to change

the display setting.

NOTE:

If you set

Simultaneous

for the computer’s display, you must

set the computer’s display resolution to the same as that of the external
monitor or other device, such as a projector.

Television

A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.

1.

Turn the computer off.

2.

Use a video cable (not supplied) to connect the television to the video out
port.

Figure 8-14 Connecting a television

3.

Turn the television on.

4.

Turn the computer on.

PS/2 mouse

Use the PS/2 keyboard/mouse port on the computer or optional Advanced Port
Replicator to connect a PS/2 mouse.

Make sure the mouse has a cable with a 6-pin connector for the PS/2 mouse port. If
the mouse’s cable is not compatible, see your dealer for an adaptor cable.